BUSINESS SURVEILLANCE PC

 

Step1: Take out the SSD and its Power supply

     Fig.1: 4 GB preloaded Cradle SSD with its Power Connector

       Fig. 2: Female Side of the Power Connector for SSD

                 Fig. 3: Male slot for Power Connector (SSD Side)

Step 2: Connect the Power cable of SSD as shown in the figure below.

               Fig. 4: Figure showing how to connect the two sides.

                              Fig. 5: After connection

Step 3: Take the SSD and look for the notch as shown below.

           Fig. 6: Showing SSD with the notch (at the middle)

Step 4: Open the PC’s Chassis and look for the IDE slot shown below on the Motherboard. Put the SSD with the notch matching the slot.

 Fig. 7: IDE Slot on the motherboard for SSD (notice the notch that should match with the SSD)

Step 5: Connect the Other side of SSD Power connector to SMPS Male connector as shown below.

  Fig. 8: Showing how to connect the male side of SSD Power connector to female side of SMPS

                         Fig. 9: After Connection